TUOTEMERKIT / PRO-JECT / Pro-Ject EVO CA premium äänivarsi 9",10" ja 12" -pituudet, musta tai high gloss

Pro-Ject EVO CA premium äänivarsi 9",10" ja 12" -pituudet, musta tai high gloss

Vaihtoehdot

Pro-Ject EVO CA premium 10" High Gloss

Pro-Ject EVO CA premium 12" musta

Pro-Ject EVO CA premium 12" High Gloss

Pro-Ject EVO CA premium 9" musta

Pro-Ject EVO CA premium 9" High Gloss

Pro-Ject EVO CA premium 10" musta

Pro-Ject EVO CA premium äänivarsi

9",10" ja 12" -pituudet, musta tai high gloss

Valitse:

Alk. 1399€ / kpl

Hintahistoria

Määrä:

Lisää ostoskoriin

Ilmainen toimitus yli 80€ tilauksiin
Tuotteet toimitetaan omasta varastosta
Lähetys samana arkipäivänä ennen klo. 14.00 (varastossa olevat tuotteet)

Top of the line high end tonearms

The next generation in 9, 10 and 12 inch

The tonearm is one of the most important parts of a turntable and therefore not only influences, but also shapes the sound in a specific way. We did in-depth listening tests with different bearing types, tonearm materials and also cartridge combinations to develop the sound we are looking for.

What you need to know

The new Premium EVO tonearm uses an inverted cardanic Swiss ABEC 7 quality bearing with 4 stainless steel tips. This bearing type is very stable and low friction, which guarantees a clear tracking. This results in a detailed and open sound stage. All the microinformation from the groove is preserved. The bearing sits in a heavyweight stainless steel housing, which provides the needed stability.

For the EVO Premium CA tonearm tube, we go for a hybrid solution. The outer tube is machined out of one-piece carbon fiber, which is lightweight and strong at the same time. Inside the carbon tube is a not visible aluminium tube which helps to damp vibrations. We use the best characteristics of both materials. Not only the materials, also the shape is well-thought-out. If you look closely, you can see that the arm tube has a conical shape, which means it gets thinner. This design avoids standing wave reflections. The arm tube is fixed by a single screw to allow rotation for an easy azimuth adjustment.

The tonearm height can be continuously adjusted by loosening the two grub screws. It gives you the option of adapting the tonearm to height changes to always achieve the best sound quality. Setting and experimenting with the VTA & Azimuth is crucial in extracting every last bit of performance out of your cartridges.

Features

PREMIUM High purity silver inner wiring
PREMIUM Heavy stainless steel bearing block
PREMIUM Massive inner tonearm bearing design of solid ring type
PREMIUM Inverted Swiss ABEC 7 quality 4 stainless steel tips in cardanic ball bearings - highest selection
PREMIUM High precision CNC machined
PREMIUM Carbon-aluminium sandwich tube construction
PREMIUM New TPE damped counterweight design
Outside ring is open to prevent bell-mode resonances
Shiny aluminium parts polished by hand
Accurate azimuth and VTA adjustment
Silicone-damped arm lift can be adjusted to suit arm height
Available as CA Black & CA HG version in 9, 10 and 12 inch
Made in Europe

About 15 years ago, we released the Evolution tonearm range. These tonearms were a huge success and with this experience we were able to further develop our tonearm design. This new EVO Premium tonearm range is the result of our work from the last years, and we are proud to also offer new finishes and many additional improvements.

10 Insights from our Research

01. Damped counterweights and super high mass bearing gimbals.

02. Conical tonearm tube design for resonances derivation & reduction of moving mass.

03. Single-piece tonearm tubes increase the stiffness & increase the sound transparency.

04. Correct tonearm and cartridge matching is critical for accurate tracking.

05. For low compliance cartridges, you need tonearms with high effective mass.

06. High-purity conductors have a significant positive influence on low level cartridge signals.

07. High mass flange design is crucial to fix the tonearm securely to the turntable.

08. Massive tonearm holder reduces the overall resonances of the whole tonearm.

09. An assortment of different counterweights is necessary to balance the cartridge correctly.

10. A precision arm can only be made with the highest level of diamond knife machinery.

Pro-Ject RPM10 Carbon & EVO CA 10" High Gloss äänivarrella

Effective tonearm lenght: 304,8 mm (12"), 254 mm (10"), 230 mm (9")

Mounting distance: 291,6 mm (12"), 238 mm (10"), 212 mm (9")

Offset angle: 18° (12"), 21,4° (10"), 24° (9")

Overhang: 13,2 mm (12"), 16 mm (10"), 18 mm (9")

Pitch of mounting grooves in headshell: 12,7 mm (12"), 12,7 mm (10"), 12,7 mm (9")

Effective tonearm mass: 20,4 g (12"), 16,6 g (10"), 15,5 g (9")

Cartridge weight: 7-20 g (12"), 5-18 g (10"), 7-18 g (9")

The range of the tracking force: 0 - 3 g (12"), 0 - 3 g (10"), 0 - 3 g (9")

The minimal null point: 125 mm (12"), 126,8 mm (10"), 130,6 mm (9")

The maximal null point: 251,7 mm (12"), 248,2 mm (10"), 243,7 mm (9")

Tonearm weight (without flange): 520g (12"), 512g (10"), 506g (9")

> Datalehti CA Premium (pdf)

> Uudet äänivarret, full presentation (pdf)

> Vertailu Standard-Premium (pdf)

> Soveltuvuudet (pdf)

Kirjaudu sisään

Pro-Ject EVO CA premium äänivarsi

9",10" ja 12" -pituudet, musta tai high gloss

Tuotekuvaus